Xerox DocuPrint C3055 User Manual page 103

[SMB]
Set this when using the SMB port.
Note
• [SMB] appears only when the network expansion card (optional) is installed.
Network / Port
SMB
Setting Item
Port Status
Print Mode
SMB
Port Status
SMB
Print Mode
Sets whether to enable or disable the SMB port at printer start-up.
If you selected [Enable], select also TCP/IP or NetBEUI.
• [Enable] (default)
• [Disable]
Note
• After changing this setting, reboot the printer.
Sets the method of processing data (print language).
• [Auto] (default)
After receiving data from a computer, the printer automatically detects its
print language and processes the data accordingly. (See *1 on P. 131.)
• [ESC/P], [PDF], [PS], [PCL]
After receiving data from a computer, the printer processes the data with the
selected print language.
• [HexDump]
Allows you to view data received from a computer by printing it in ASCII
codes (hexadecimal format). (See *3 on P. 131.)
Note
• On the DocuPrint C3055, [PS] appears only when the PostScript software kit
(optional) is installed.
Port Status
SMB TCP/IP
Port Status
SMB NetBEUI
Description
5.2 Setting the Common Menus
103