Paper Priority - Xerox DocuPrint C3055 User Manual

Setting Item
Bypass Tray

[Paper Priority]

Setting Item
Plain Paper,
Recycled Paper,
Bond Paper,
User 1 to User 5
122
5 Control Panel Menus
Sets the type of the paper loaded in the bypass tray.
• [Plain Paper] (default), [Recycled Paper], [Bond Paper], [Transparency],
[Heavyweight 1], [Heavyweight 2], [Labels], [Coated 1] to [Coated 3],
[Envelope], [Postcard], [Plain S2], [Recycled S2], [Bond S2], [Heavyweight 1
S2], [Heavyweight 2 S2], [Coated 1 S2] - [Coated 3 S2], [Postcard S2], [1.
User 1] - [5. User 5]
Note
• [Bypass Tray] appears only when [Bypass Mode] is set to [Panel Specified].
• [1. User 1] to [5. User 5] display the names specified under [Paper Name].
Printer Settings
Paper Priority
Sets the priority order of paper types. This setting will be used by the Auto Tray
Selection feature. By default, [Plain Paper] is set to [1], [Recycled Paper] is set
to [2], [Bond Paper] is set to [3], and the other paper types are set to [Off].
• [1] to [8]
Sets the priority order of paper types.
• [Off]
Does not set the priority order of paper types.
Note
• [1. User 1] to [5. User 5] display the names specified under [Paper Name].
• You can assign the same priority order to different paper types. In such case,
the printer selects a tray based on the [Tray Priority] setting.
Refer to
• " Auto Tray Selection Feature" (P. 89)
Description
Paper Priority
Plain Paper
Paper Priority
Recycled Paper
Paper Priority
Bond Paper
Paper Priority
1.User 1
Paper Priority
2.User 2
Paper Priority
3.User 3
Paper Priority
4.User 4
Paper Priority
5.User 5
Description