Tray Priority; Paper Size - Xerox DocuPrint C3055 User Manual

[Tray Priority]

Printer Settings
Tray Priority
Setting Item
1st to 3rd

[Paper Size]

Printer Settings
Paper Size
Setting Item
[Tray 1] to
[Tray 4]
Tray Priority
Tray Priority
Tray Priority
Sets the priority order of the paper trays. This setting will be used by the Auto
Tray Selection feature. You cannot assign a priority order to the bypass tray.
• [Tray 1] to [Tray 4]
Sets the priority order of the paper trays. By default, the priority order of the
trays are:
tray 1, tray 2, tray 3, and tray 4.
Note
• You cannot assign the same priority to more than one tray. The [2nd] tray
must be a tray other than the [1st] tray, and the [3rd] tray must be a tray other
than the [1st] and [2nd] trays. The remaining tray will be the [4th] tray.
• [Tray Priority] appears only when the optional sheet feeders are installed.
Paper Size
Tray 1 Auto*
Paper Size
Tray 2 Auto*
Paper Size
Tray 3 Auto*
Paper Size
Tray 4 Auto*
Paper Size
Bypass Driver*
Sets the paper size of the paper loaded in each paper tray.
• [Auto] (default)
Automatically senses the paper size.
• [Custom]
Sets the length and width of the paper.
When [Custom] is selected, set the orientation of the paper to [Portrait (Y)] or
[Landscape (X)].
Note
• The display only shows the trays that are actually installed on the printer.
• For details on how to set custom sizes, refer to "Setting the Paper Sizes of
the Trays 1 - 4" (P. 87).
1st
2nd
3rd
Description
Description
5.2 Setting the Common Menus
123