Table of Contents
Advertisement
I Turning power ON
q Push [K
] to turn the power ON.
I
• A power-up alert tone sounds for
about 1 sec. and an opening mes-
sage may appear.
w If the transceiver is programmed
for a start up passcode, input
digit codes as directed by your
System operator.
• The keys in the diagram below can
be used for password input:
•
The transceiver detects numbers in the same block as identical.
Therefore "1234" and "6789" are the same.
P
P
KEY
0
0
NUMBER
5
e When the "
" indication does not clear after inputting
PWORD
4 digits, the input code number may be incorrect. Turn
power off and start over in this case.
Opening message may
differ depending on the
pre-setting.
Input your password if
this display appears.
P
P
1
2
3
1
2
3
4
6
7
8
9
OPERATION
I Channel selection
Several types are available, and the channel selection
method may differ according to your system set up.
NON-BANK TYPE:
Push the [
]/[
] keys to select the desired operating
channel, in sequence; or,
push one of the [
] to [
CH 1
CH 4
directly.
BANK-TYPE:
Push [
] to select the desired bank number.
BANK
AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this type. When turning
the power ON, the transceiver automatically starts scanning.
Scanning stops when receiving a call or when taking the mi-
crophone off hook.
2
] keys to select these channels
6
Hide quick links:
Advertisement
Table of Contents
