Table of Contents
Advertisement
1
PANEL DESCRIPTION
TX CODE KEY
TX CH
Select a transmit 5-tone code (station code) channel.
• Push and hold to changes the contents of the sta-
tion code using [
• Push to selects a TX 5-tone code channel using
[
]/[
TX CODE CHANNEL UP/DOWN KEY
CODE
Push to selects a TX code channel directory.
DTMF CHANNEL SELECT KEY
DTMF
Push this key to select a DTMF channel.
• Push this key, then select the desired DTMF chan-
nel using the [
Push and hold this key to transmit the selected
DTMF code.
NOTE: DTMF channels 6 and 7 are used for ID
code and emergency code respectively, depend-
ing on your system set up.
Ask your System Operator or Dealer about DTMF
channels 6 and 7 before using these.
C. TONE CHANNEL ENTER KEY
TONE
Push this key then input a continuous tone memory
channel number via the keypad to change the tone
frequency.
5
]/[
] keys.
] keys after pushing this key.
]/[
] keys.
ID MEMORY READ KEY
ID MR
Recalls detected ID codes.
• Push this key, then push [
• Up to 5 ID's are memorized.
Push and hold this key to erase all memorized IDs.
LIGHT
LITE
Push to select the backlight condition.
ON
:Turns ON the backlight continuously.
OFF
:Turns OFF the backlight.
AUTO
:Turns ON/OFF depending on the ACC
socket pin 1 voltage.
ON: Low (0 V)
ATTENUATOR
ATT
Push to turn the attenuator function ON/OFF.
NOTE: The attenuator function protects desired
signals from distorting when excessively strong
signals, such as broadcast, pager signals, etc.
are nearby.
TRUNKING GROUP SWITCH
GRP
Push to select the Trunking group.
]/[
] for selection.
OFF: High (12 V)
Hide quick links:
Advertisement
Table of Contents
