Resolving The No Mag Installed Error - Fargo Persona M30 User Manual

RESTRICTED USE ONLY

Resolving the No Mag Installed Error

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
•
Symptom: There is not a Magnetic Encoder installed.
•
Printer Error State: A print job with Magnetic encoding was sent with no
Magnetic encoder installed in the Printer.
•
Driver Monitor Error Display: No Mag Installed
Persona M30 Card Printer User Guide (Rev. 1.0)
Fargo Electronics, Inc.
4-14