Using The Card Tab (Persona M30); Adjusting The Card Size Option - Fargo Persona M30 User Manual

RESTRICTED USE ONLY

Using the Card tab (Persona M30)

Adjusting the Card Size Option

Step Description
• Select either the CR-80 or CR-79 card size depending on your requirements.
1
• Click on the inches or mm option to choose the desired unit of
measurement.
(Note No.1: When designing a card format, always set the card size or page
size within the card design program to the exact dimensions of a CR-80 card or
a CR-79 card.)
(Note No.2: The Card Size indicates that the Printer accepts standard, credit
card sizes CR-80 or CR-79 (ISO ID-1) cards. The dimensions of the total print
area for this card size appear in the Print Width: and Print Length: areas, as
shown below.)
Persona M30 Card Printer User Guide (Rev. 1.0)
Fargo Electronics, Inc.
5-3