Resolving The Flipper Jam Error - Fargo Persona M30 User Manual

RESTRICTED USE ONLY

Resolving the Flipper Jam Error

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer. See the Installing the Flipper Table Module Assembly (D900200)
needed).
Step Procedure
1 Review the following information.
•
Symptom: The Flipper Table Module is jamming.
•
Printer Error State: The Flipper Table has jammed while either aligning
itself or flipping a card.
•
Driver Monitor Error Display: Flipper Jam
Persona M30 Card Printer User Guide (Rev. 1.0)
Fargo Electronics, Inc.
procedure (as
4-36