Table of Contents
Advertisement
DOWNCON SETTING
Items/
Adjustable
Data Saved
Range
DOWNCON
For setting the mode of the down
SQUEEZE
MODE
LT-BOX
converter output signals.
S-CROP
Note
Part of the down converter output image
at the top or bottom may be disrupted
when "LT-BOX" is selected in this menu
option, but this is not a malfunction.
– C U F R
DETAIL
For setting the detail function for the
ON
OFF
down converter output signals ON/OFF.
The down converter output signals
contain detailed components that are set
during HD signal processing. In this
setting, these signals overlap the detailed
components dedicated to the down
converter outputs.
Even if this setting is turned off, it is
impossible to turn off the detailed
components set during HD signal
processing.
– C U F R
H.DTL LEVEL 00
For setting the horizontal detail correction
level for the down converter output
08
signals.
– C U F R
31
V.DTL LEVEL 00
For setting the vertical detail correction
level for the down converter output
04
signals.
– C U F R
31
DTL CORING 00
For setting the noise elimination level of
01
the details.
:
15
– C U F R
H.DTL FREQ. 1
For selecting the horizontal detail
frequencies.
3
1: 2.5 MHz 4: 4 MHz
2: 3 MHz
5
3: 3.5 MHz
– C U F R
2D LPF
ON
For setting the 2-D low path filter reducing
cross colors.
OFF
ON: Cross colors are reduced.
OFF: Cross colors are not reduced.
– C U F R
SETUP
0%
For setting the setup level for the down
7.5%
converter output signals.
(Only for 1080-59.94i)
Note
When the system frequency is set to 50
Hz, the setup level will be 0%.
– C U F R
Note
The <DOWNCON SETTING> screen is displayed when SYSTEM
MODE is set to 1080-59.94i, 1080-50i (HD mode).
Remarks
5: 4.5 MHz
LCD MONITOR
Items/
Adjustable
Data Saved
Range
BRIGHTNESS –7
Adjust the LCD monitor brightness.
:
+0
:
– C U F –
+7
COLOR LEVEL –7
Adjust the LCD monitor chroma level.
:
+0
:
– C U F –
+7
CONTRAST
–7
Adjust the LCD monitor contrast.
:
+0
:
– C U F –
+7
BACKLIGHT
OFF
Turn the backlight off, or adjust its
LOW
brightness.
NORMAL
OFF:
HIGH
LOW:
NORMAL
HIGH:
– C U F –
SELF SHOOT NORMAL
Select whether or not to change the LCD
MIRROR
monitor to mirror image.
NORMAL: Do not change to mirror
MIRROR: Change to mirror image.
– C U F –
Menu: Menu Description Tables
Remarks
turns the backlight OFF.
turns the backlight to lower
than NORMAL.
Mode normally used
This is brighter than
NORMAL
image.
167
Advertisement
Table of Contents
