Panasonic P2HD AJ-HPX3100G Operating Instructions Manual page 81

Information Item
20. WHITE BAL switch A
position B
P
T
21. Stored gain indication 6:/10:/12:/15:/20:/24:/
28:/34:
22. Gain value
¢¢dB
23. Audio input channel - - - - - - - - +
and level meter F
W
R
24. Super iris ON S
25. Iris override + +
indication +
– –
–
(No indication)
26. Super black ON B
27. Iris, F value NC
OPEN
F1.7 - F16
CLOSE
28. Zoom indication Z00 - Z99
[i]
29. INTERVAL REC/PRE
RECORDING
information display
P-REC (blink)
P-REC (lit)
1-CLIP
1¢CLIP
START 1¢CLIP
END 1-CLIP
30. Gamma mode display HD/SD/FLK1/FLK2/FLK3/
FREC/VREC
31. ATW lock status ATW LOCK
32. Types of markers MKR: A/B/OFF
33. Y GET value
¢¢¢.¢%
34. Digital zoom DZa2/a3/a4
Indication
WHITE BAL switch positioned at [A].
WHITE BAL switch positioned at [B].
WHITE BAL switch positioned at [PRST].
ATW mode is set. However it flashes when intensity and color are outside the
operation range
Storage gain (DS.GAIN) value (when active)
Current gain value.
Selected channel together with its audio level.
AUDIO IN switch is positioned at FRONT.
AUDIO IN switch is positioned at W.L.(WIRELESS)
AUDIO IN switch is positioned at REAR.
Super iris ON.
Correction phase of the iris override (when active)
+ + : On the open side by 1
– – : On the closed side by 1
No indication : Standard status
Super black ON.
Note
This is displayed when "S+IRIS" or "S" is selected in the IRIS menu option.
You can select the IRIS menu option from the <VF INDICATOR> screen of the
VF page.
Lens cable is not connected.
Lens iris is at maximum.
Lens iris value
Lens iris closed.
Note
These indications are provided when the lens is capable of indicating the iris
value. When the iris is being overridden, they blink.
Zoom degree is indicated. This indication is not provided for a lens that does
not return the zoom position, even if the indication is set to ON.
Displayed before and after operation during INTERVAL REC mode.
Displayed during INTERVAL REC operation.
(blink)
Displays the pause time before the next recording during INTERVAL REC.
(blink) ¢¢h¢¢m/¢¢s
Displayed until images/audio are completely recorded to the P2 card after
stopping recording. Do not remove the P2 card or turn the power off until the
flashing display completely turns off.
Note
"P-REC" flashes regardless of the PRE RECORDING function settings.
When the PRE RECORDING function is set to ON, lights when you pull the
MARKER SEL, MODE CHK / MENU CANCEL switch toward you. In addition,
this displays when the mode switches to PRE RECORDING mode by pressing
the PRE REC assigned USER switch.
Displayed when a recording is about to be recorded to a new clip while ONE
CLIP REC mode is on.
Displayed when a recording can be compiled and recorded to the previous clip
while ONE CLIP REC mode is ON.
Note
If the P2 card is removed or the clip is deleted, subsequent recordings are
recorded to a new clip when the previous combined clip does not exist. In
this case, "1 ¢ CLIP" may remain displayed.
Displayed when recording of a new clip has started in ONE CLIP REC mode.
Displayed when a combined clip is complete in ONE CLIP REC mode.
Gamma mode selected with the GAMMA MODE SEL menu option.
You can select the GAMMA MODE SEL menu option from the <GAMMA>
screen of the PAINT page.
Displayed when the color temperature is fixed by pressing the USER switch to
which the ATW LOCK function is assigned while ATW is operating.
Types of markers currently displayed.
While Y GET is ON, displays output intensity level adjacent to the center
marker as a percentage.
During digital zoom mode, displays the magnification.
Adjustments and Settings for Recording : Viewfinder Screen Status Displays
Status
+: On the open side by 0.5
–: On the closed side by 0.5
81