Table of Contents
Advertisement
8.
Clip Number
The numbers set by the camera for all the clips
recognised correctly by the P2 card. These numbers are
allocated in chronological order, by shooting dates and
times.
If clips cannot be played because of different recording
formats, they are displayed in red.
9.
Defective Clip Indicator and
Unknown Clip indicator
This marker is displayed for defective clips, which may
result from a variety of causes, e.g., powering-down
during recording.
Clip with yellow defective clip indicators can be restored
in some cases.
>[Restoring Clips] (page 126)
A clip displayed with a red corrupt marker cannot be
restored and must be deleted. If the clip cannot be
deleted, format the P2 card.
is displayed for clips such as those which differ in
format from the P2 standard.
10.
Incomplete Clip Indicator
Indicates that although a clip is recorded across multiple
P2 cards, one of these cards is not inserted into a P2
card slot.
11.
Shot Mark Indicator
This marker is displayed for a clip with a shot mark
attached.
>[Shot Mark] (page 123)
12.
Indicator for clips with proxy
This marker is displayed for clips with proxy attached.
13.
Text Memo Indicator
This marker is displayed for a clip with a text memo
attached.
14.
Edit Copied Clip Indicator
This marker is displayed on a clip when the model
supports edit copy, such as the AJ-HPM200. For more
information about edit copying, see the instruction
manual for a mode that supports edit copying.
15.
Wide Clip Indicator
This marker is displayed for clips recorded with the 16:9
aspect ratio. However, it does not accompany clips in
HD format.
16.
Thumbnail Scroll Bar
Indicates which part of the whole thumbnail is currently
being viewed.
120
Manipulating Clips with Thumbnails: Thumbnail Manipulations Overview
Advertisement
Table of Contents
