Table of Contents
Advertisement
Information Item
10. GAIN switch
assignment
information (during
MODE CHECK)
11. Camera Warning and
Report Area
(related to AWB, ABB
and switch settings)
(Switch changeover
indication)
(Low light warning)
Adjustments and Settings for Recording : Viewfinder Screen Status Displays
78
Indication
LOW/MID/HIGH
–6 to 30
S.GAIN
30/36/42
DS.GAIN
6:/10:/12:/
15:/20:/24:/
28:/34:
AWB A ACTIVE
AWB B ACTIVE
AWB A OK ¢.¢K
AWB B OK ¢.¢K
AWB BREAK ¢.¢K
AWB NG
COLOR TEMP LOW
COLOR TEMP HIGH
LEVEL OVER
LOW LIGHT
TIME OVER
ATW MODE
AWB PRESET ¢.¢K
AWB UNABLE
S.GAIN MODE
CHECK FILTER
ABB ACTIVE
ABB OK
ABB BREAK
ABB NG
B-SHD READY
B-SHD ACTIVE
B-SHD OK
B-SHD BREAK
B-SHD NG
WHITE: #
¢.¢K
ATW MODE
AUTO KNEE: ON/OFF
DRS: ON/OFF
GAIN:¢¢ dB+ ¢¢:
SS: 1/¢¢¢¢ or ¢¢¢.¢deg
SS: 1 1/¢¢¢¢ or 1¢¢¢.¢d
CC: ¢¢¢¢ ¢¢K
ND: ¢
EXTENDER: ON/OFF
IRIS: ¢¢ F ¢.¢
LOW LIGHT
Value set for the master gain
Example: LOW: 0
Gain value to which S.GAIN and DS.GAIN are assigned
These are displayed only during MODE CHCK.
AWB being performed on Ch A.
AWB being performed on Ch B.
AWB successful on Ch A.
AWB successful on Ch B.
AWB action aborted by user.
AWB action failed. The second line indicates the status.
Color temperature too low.
Color temperature too high.
Brightness too high.
Brightness too low.
Action timed-out.
This is indicated when AWB cannot be executed since ATW is being
operated.
AWB cannot operate because the WHITE BAL switch is set to PRST.
AWB cannot operate. The status is displayed on the second line.
Super gain is operating.
Recheck the location of the filter switching tab when turning the power on and
operating AWB.
ABB being performed.
ABB action successful.
ABB action aborted by user.
ABB action failed.
Black shading accepted (by holding down the AUTO W/B BAL switch during
ABB adjustment).
Black shading being adjusted.
Black shading adjustment successful.
Black shading adjustment aborted by user.
Black shading adjustment failed.
The WHITE BAL switch has been switched. # is replaced with A, B or PRST.
The set color temperature.
ATW is set.
Displayed when the OUTPUT/AUTO KNEE switch is assigned to ON or OFF
and the AUTO KNEE switch is turned ON/OFF.
Displayed when the OUTPUT/AUTO KNEE switch is assigned to DRS and
the AUTO KNEE switch is turned ON/OFF.
Gain has been switched with the GAIN selector switch or a user button. When
DS GAIN is operating, the value is also displayed.
When the shutter speed has been switched, the shutter speed is indicated.
Shutter speed is in SYNCHRO SCAN mode.
This appears when the CC filter setting has been selected.
This appears when the ND filter setting has been selected.
Lens extender has been turned on or off.
Indicated when the iris override correction value is to be changed.
Brightness too low.
Status
Advertisement
Table of Contents
