Table of Contents
Advertisement
25
24
23.
GENLOCK IN connector
When GENLOCK is set on the camera, or when the time
code is externally locked, reference signals are input.
Also, you can check the return video signal on the
viewfinder screen by inputting an HD-Y signal, and
selecting HD-Y with the RETURN SIGNAL menu option.
You can select the RETURN SIGNAL menu option from
the <GENLOCK> screen of the SYSTEM SETTING
page.
> [Setting External Reference Signal and GENLOCK]
(page 61)]
24.
SDI IN connector
You can input HD/SD SDI signals. By selecting "SDI"
with the REC SIGNAL menu option, you can record
signals from this input connector.
You can select the REC SIGNAL menu option from the
<SYSTEM MODE> screen of the SYSTEM SETTING
page.
Also, you can set GENLOCK on the menu based on this
input signal.
> [Setting External Reference Signal and GENLOCK]
(page 61)]
Note
When inputting HD SDI signals use a cable above 5C-FB.
25.
SDI OUT connector
This is the dedicated SDI output connector. The same
signal format as the SYSTEM MODE is output. Down
convert and up convert are not supported.
You can independently set character superimposition
with the 26.MON OUT (monitor output) connector.
> [Settings of signals output from SDI OUT connector]
(page 88)
Note
When inputting HD SDI signals use a cable above 5C-FB.
24
Parts and their Functions: Shooting and Recording/Playback Functions Section
28
27
29 30
26
23
26.
MON OUT (monitor output) connector
This is the video output connector for the monitor.
According to the MONITOR OUT MODE menu option,
images independent of SDI OUT can be output. Also,
with the menu settings, HD-SDI or down converted SD-
SDI or VBS can be selected. Up convert is not
supported.
You can select the MONITOR OUT MODE menu option
from the <OUTPUT SEL> screen of the SYSTEM
SETTING page.
You can set character superimposition with the 9.MON
OUT CHARACTER switch switch separately from the
25.SDI OUT connector.
> [Settings of signals output from MON OUT
connector] (page 89).
Note
When inputting HD SDI signals use a cable above 5C-FB.
27.
REC button
Pressing this button starts recording, and pressing again
stops recording.
This button has the same function as 6.REC button and
the VTR button at the lens.
It may be disabled with 28.REC protection button.
28.
REC protection button
This button disables 27.REC button on the handle.
ON: The REC button is enabled.
OFF: The REC button is disabled.
29.
USB 2.0 connector (HOST)
30.
USB 2.0 connector (DEVICE)
A USB 2.0 cable is connected here.
When the menu option PC MODE is set to "ON", data
can be transferred via USB 2.0. During such data
transfer, recording, playback or operations of clips is
permitted.
The menu item PC MODE is found in the <SYSTEM
MODE> screen on the SYSTEM SETTING page.
> [Connection with external devices using the USB 2.0
port] (page 136)
Advertisement
Table of Contents
