Table of Contents
Advertisement
If the following messages are displayed when the JOG dial
button is pressed, the data cannot be deleted.
Error message
DELETE NG
NO CARD
(No SD memory card is inserted)
DELETE NG
ERROR
(Data cannot be deleted)
DELETE NG
WRITE PROTECT
(The SD card is write protected)
DELETE NG
CANNOT ACCESS
(It is impossible to access the
data)
DELETE NG
NO FILE
(No file is available)
7
Move the arrow (cursor) to YES by turning the
JOG dial button and then press the JOG dial
button.
When the write operation is completed, the following
message is displayed.
DELETE OK
Measures
Insert an SD memory card.
It is assumed that the SD
memory card is defective.
Replace the card.
Eject the SD memory card and
release write protection.
It is impossible to access the SD
memory card while the card is in
use. After completion of the
respective operations, perform
the read operation again.
Select the FILE NO. containing
astigmatism files and perform
the delete operation.
Adjustments and Settings for Recording : Chromatic Aberration Compensation (CAC)
When CAC FILE does not operate properly
The following error messages are displayed in the viewfinder
when CAC does not operate properly or CAC files cannot be
read properly.
Error message
Meanings
When the CAC FILE is
read from the SD
memory card to
FILE MEMORY
memory in the unit in
FULL
EMPTY mode, the
built-in memory is full.
When the CAC
function is set to ON
and no CAC FILE
applicable to the
CAC FILE DATA
connected lens is
NOT FOUND
available. This is
displayed when the
power of the unit is
turned on.
When the unit cannot
respond to the return
data from the lens, or
CAC LENS DATA
when any responses
INVALID
other than ones as
defined in the CAC
FILE are returned.
Initialization of the lens
position detection
LENS INITIALIZE
(focus/zoom) in the
NOT
encoder type is not
COMPLETED
completed yet.
Notes
When lens optical accessories (converter lens, attachment)
are installed, the CAC may not operate properly due to
changes in the optical characteristics of the lens. In this
case, turn off the CAC function.
When focus support is used with CANON lenses, data must
be recorded after initialization in the automatic initialization
mode. The state where the focus ring is moving may be
recorded.
When the CAC does not operate and no error message is
displayed, the version of the software for the lens may be out
of date and invalid. Please contact the lens manufacturer.
Measures
Read the CAC FILE in
a mode other than
EMPTY mode.
Read the CAC FILE
that is applicable for
the lens to be used.
This lens does not
support CAC
correction. Although it
cannot execute CAC
correction, using this
lens presents no
problems.
Turn the focus/zoom
ring to through the
intermediate point of
the operation range.
107
Advertisement
Table of Contents
