Trip Computer Reset - Triumph Trophy Handbook

General Information
Tyre Pressures - if Tyre Pressure
Monitoring System (TPMS) is Fitted
Tyre pressure information is displayed for
each tyre (see page 50). The letter F or R
identifies the front or rear tyre.
F 36
R 42
Digital Speedometer
The digital speedometer displays the current
speed in the selected units (mph or km/h).
The units are set independently of the units
set in the Bike Setup menu.
0
TES Settings (Trophy SE only)
The display will show the current settings for
the TES system; the upper line will show the
TES Mode (see page 54) and the lower line
will show the TES Loading (see page 54).
SPORT
40

Trip Computer Reset

To reset either of the trip computers, select
and display the trip meter to be zeroed then
press and hold the SCROLL button, in either
direction, for 2 seconds. After 2 seconds, the
trip meter on display will reset to zero.
The following trip items will be reset:
PSI
• journey time;
PSI
• journey distance;
• average fuel consumption;
• fuel used;
• average speed.
Trip 2 can also be set to reset automatically
after an adjustable time delay of between
1 and 8 hours (see page 45).
MPH