Trip Computer Reset; Coolant Temperature Gauge - Triumph Speed Triple Handbook

begin to flash. The minutes display is
adjusted in the same way as for the hours.
Once both hours and minutes are correctly
set, press the 'set' button to confirm the
setting. The display will cease to flash.

Trip Computer Reset

1
2
3
ccna
1. Trip computer display
2. Scroll button
3. Set button
Warning
Do not attempt to switch between the trip
computer display modes or reset the trip
computer with the motorcycle in motion as
this may lead to loss of motorcycle control
and an accident.
To reset the trip computer, select one of the
trip computer displays, instead of the clock,
by pressing the 'scroll' button briefly. Press
the 'scroll' and 'set' buttons simultaneously
for 2 seconds. After the 2 seconds have
elapsed, the trip computer will reset.
General Information

Coolant Temperature Gauge

1
ccna
1. Coolant temperature gauge
The coolant temperature gauge indicates the
temperature of the engine coolant.
When the ignition is switched on, all 10 bars
of the display will be shown. When the
engine is started from cold the display will
show 1 bar. As the temperature increases,
more bars will be shown in the display.
The normal temperature range is between 3
and 6 bars.
If the coolant temperature becomes too high,
the display will show 9 bars and will start to
flash. The high coolant temperature warning
light in the tachometer will also be
illuminated.
If the coolant temperature increases further,
all 10 bars of the display will flash. The high
temperature warning light in the tachometer
will remain illuminated.
23