Connecting An External Tad - Brother MFC-9125CN User Manual

Viewing the Caller ID List
Your machine stores information for the last
thirty calls in the Caller ID list. You can view
or print this list. When the thirty-first call
comes in to the machine, it replaces
information about the first call.
a
Press Menu, 2, 0, 3.
b
Press a or b to choose Display#.
Press OK.
The Caller ID of the last call will appear
on the display. If no ID is stored, the
beeper will sound and No Caller ID
will appear on the display.
c
Press a or b to scroll through the Caller
ID memory to choose the Caller ID you
want to view, and then press OK.
The LCD will show the caller's number
and the date and time of the call.
d
To finish viewing, press Stop/Exit.
Printing the Caller ID List
a
Press Menu, 2, 0, 3.
b
Press a or b to choose Print Report.
Press OK.
If no ID is stored, the beeper will sound
and No Caller ID will appear on the
LCD.
c
Press Mono Start or Colour Start.
d
After printing has finished,
press Stop/Exit.
Telephone and external devices
Connecting an external
7
TAD
You can connect an external Telephone
Answering Device (TAD) to the same line as
your machine. When the TAD answers a call,
your machine will "listen" for the CNG (fax
calling) tones sent by a sending fax machine.
If it hears them it will take over the call and
receive the fax. If it does not hear them, it will
let your TAD take a voice message and the
display will show Telephone.
The external TAD must answer within four
rings (we recommend you set it to two rings).
This is because your machine cannot hear
the CNG tones until the external TAD has
picked up the call. The sending machine will
send CNG tones for only eight to ten seconds
longer. We do not recommend using the toll
saver feature on your external TAD if it needs
more than four rings to activate it.
Note
7
If you have problems receiving faxes,
reduce the ring delay setting on your
external TAD to one or two rings.
7
7
57