Cleaning The Scanner Glass - Brother MFC-9125CN User Manual

e
Wipe the inside and the outside of the
paper tray with a dry, lint-free soft cloth
to remove dust.
f
Re-load the paper and put the paper tray
firmly back in the machine.
g
Plug the machine's power cord back into
the electrical socket first, and reconnect
all cables and telephone line cord. Turn
on the machine.

Cleaning the scanner glass

a
Turn off the machine. Unplug the
telephone line cord first, disconnect all
cables and then unplug the power cord
from the electrical socket.
b
Lift the document cover (1).
Clean the white plastic surface (2) and
scanner glass (3) underneath it with a
soft lint-free cloth moistened with water.
1
2
3
Troubleshooting and routine maintenance
c
In the ADF unit, clean the white bar (1)
and the scanner glass strip (2)
underneath it with a soft lint-free cloth
moistened with water.
d
Plug the machine's power cord back into
the electrical socket first, and reconnect
all cables and telephone line cord. Turn
on the machine.
Note
In addition to cleaning the scanner glass
C
and glass strip with a soft lint-free cloth
moistened with water, run your finger tip
over the glass to see if you can feel
anything on it. If you feel dirt or debris,
clean the glass again concentrating on
that area. You may need to repeat the
cleaning process three or four times. To
test, make a copy after each cleaning.
1
2
C
159