Fax Detect; Setting The Print Density - Brother MFC-9125CN User Manual

Fax Detect

If Fax Detect is On:
The machine can receive a fax automatically,
even if you answer the call. When you see
Receiving on the LCD or hear a click on the
phone line through the handset you are
using, just replace the handset. Your
machine will do the rest.
If Fax Detect is Off:
If you are at the machine and answer a fax
call first by lifting the external handset, then
press Mono Start or Colour Start, and then
press 2 to receive.
If you answered at an extension telephone
press l51 (l91 for New Zealand).
(See Operation from external or extension
telephones on page 59.)
Note
• If this feature is set to On, but your
machine does not connect a fax call when
you lift an external or extension telephone
handset, press the remote activation code
l51 (l91 for New Zealand).
• If you send faxes from a computer on the
same telephone line and the machine
intercepts them, set Fax Detect to Off.
• We do not recommend having a PC plus
fax machine on the same line.
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 3.
c
Press a or b to choose On or Off.
Press OK.
d
Press Stop/Exit.

Setting the Print Density

6
You can adjust the Print Density setting to
make your printed pages darker or lighter.
6
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 7.
c
Press a to make the print darker.
Or, press b to make the print lighter.
Press OK.
6
d
Press Stop/Exit.
.
Receiving a fax
6
.
6
49