Brother MFC-9125CN User Manual page 167

Paper is jammed at the back of the
machine
If the LCD shows Jam Rear, a paper jam
has occurred behind the face-up output tray.
Follow these steps:
a
Turn off the machine's power switch.
Unplug the telephone line cord first,
disconnect all cables, and then unplug
the power cord from the electrical
socket.
b
Open the back cover.
CAUTION
HOT SURFACE
After you have just used the machine, some
internal parts of the machine will be
extremely hot. Wait at least 10 minutes for
the machine to cool down before attempting
to clear the paper jam.
c
Push down and pull the green tabs at
the left and right hand sides toward you
and fold down the fuser cover (1).
1
Troubleshooting and routine maintenance
d
Using both hands, gently pull the
jammed paper out of the fuser unit.
C
e
Close the fuser cover (1).
1
f
Fully close the back cover.
g
Plug the machine's power cord back into
the electrical socket first, and reconnect
all cables and telephone line cord. Turn
on the machine's power switch.
C
155