Calibration - Brother MFC-9125CN User Manual

d
Wipe the two pick-up rollers (1) inside of
the machine to remove dust.
1
e
Put the paper tray back in the machine.
f
Plug the machine's power cord back into
the electrical socket. Turn on the
machine.
168

Calibration

The output density for each colour may vary
depending on the environment the machine is
in such as temperature and humidity.
Calibration helps you to improve the colour
density.
a
Press Menu, 4, 5.
b
Press a or b to select Calibrate.
c
Press OK.
d
Press 1 to select Yes.
e
Press Stop/Exit.
You can reset the calibration parameters
back to those set at the factory.
a
Press Menu, 4, 5.
b
Press a or b to Reset.
c
Press OK.
d
Press 1 to select Yes.
e
Press Stop/Exit.
Note
• If an error message is displayed, press
Stop/Exit and try again. For more
information, see Error and maintenance
messages on page 145.
• If you print using Windows
you need to perform the calibration from
®
the Windows printer driver. See
Advanced tab in the Software User's
Guide on the CD-ROM.
• If you print using the Macintosh printer
driver, you need to perform the calibration
using the status monitor. See Status
Monitor in the Software User's Guide on
the CD-ROM. When the Status Monitor
is open, choose Control / Color
Calibration from the menu bar.
C
®
printer driver,