Checking And Cancelling Waiting Jobs; Sending A Fax Manually; Out Of Memory Message - Brother MFC-9125CN User Manual

Checking and cancelling
waiting jobs
Check which jobs are still waiting in the
memory to be sent. If there are no jobs, the
LCD will show No Jobs Waiting. You can
cancel a fax job that is stored and waiting in
the memory.
a
Press Menu, 2, 7.
The number of jobs still to be sent will be
displayed.
b
Do one of the following:
Press a or b to scroll though the

waiting jobs, press OK to choose a
job, and then press 1 to cancel it.
 Press 2 to exit without cancelling.
c
When you have finished, press
Stop/Exit.

Sending a fax manually

Manual transmission
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
a
Make sure you are in Fax mode
b
Load your document.
c
Press Hook and listen for a dial tone. Or
pick up the handset of an external
telephone and listen for a dial tone.
d
Dial the fax number you want to call.
e
When you hear the fax tone, press
Mono Start or Colour Start.
 If you are using the scanner glass,
press 1 to send a fax.
f
Replace the handset of an external
telephone.

Out of memory message

5
If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Mono Start to send
the pages scanned so far, or to press
Stop/Exit to cancel the operation.
Note
 If you get an Out of Memory message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
Real Time Transmission on page 43.)
 To make extra memory available, you can
do the following:
• Print the faxes that are in the memory.
(See Printing a fax from the memory
on page 51.)
5
• Turn off Fax storage. (See Turning off
Remote Fax Options on page 74.)
• Add Optional Memory. (See Memory
5
board on page 126.)
.
Sending a fax
5
5
45