Brother MFC-9125CN User Manual page 176

e
Press Mono Start or Colour Start. The
machine will pull in the piece of paper
and start cleaning the drum unit.
Drum Cleaning
Please Wait
f
When the machine has finished
cleaning, Completed appears on the
LCD. Press Stop/Exit so that the
machine returns to the Ready mode.
g
Repeat steps c to f two more times
using a new blank sheet of paper each
time. Upon completion please discard
the used paper. If the print problem is
not resolved please contact your
Brother dealer.
164
Large spots on the printed pages
If your printout has coloured spots at 94 mm
intervals, follow the steps below to solve the
problem.
a
Turn off the machine. Unplug the
telephone line cord first, disconnect all
cables, and then unplug the power cord
from the electrical socket.
b
Fully open the top cover by lifting up on
the handle (1).
1
IMPORTANT
When the scanner is open, you cannot
open the top cover.
C