Advertisement
BIPAC-74x Series Router – 741 GE, 741 GE V2.0 and 743 GE
The Rear Ports
Only the 743-GE unit has a wireless interface and antenna. 741-GE and
Port
1
LINE
2
CONSOLE
3
LAN
1X
—
(RJ-45 connector)
4
RESET
PWR
5
6
Power Switch
Chapter 2: Installing the Router
741-GE V2 routers do not have an antenna or wireless interface.
Connect the supplied RJ-11 ("telephone") cable to this port when
connecting to the ADSL/telephone network.
Connect a PS2/RS-232 cable to this port when connecting to a
PC's RS-232 port (9-pin serial port).
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
4X
network of 10Mbps or 100Mbps.
After the device is powered on, press it to reset the device or
restore to factory default settings.
0-3 seconds: reset the device
3-6 seconds: no action
10-12 seconds: restore to factory default settings (this is used
when you can not login to the router, e.g. forgot the password)
Connect the supplied power adapter to this jack.
Power ON/OFF switch
Meaning
7
Advertisement
