Advertisement
BIPAC-74x Series Router – 741 GE, 741 GE V2.0 and 743 GE
Example: Configuring your firewall to allow for a publicly accessible web server
on your LAN
The pre-defined port filter rule for HTTP (TCP port 80) is the same no matter whether the
firewall is set to a high, medium or low security level. The default setting for HTTP allows
outbound access, but not inbound access. To setup a web server located on the local network
when the firewall is enabled, you have to configure the Port Filters setting for HTTP.
As you can see from the diagram below, when the firewall is enabled with one of the three
presets (Low/Medium/High), inbound HTTP access is not allowed.
Configuring Packet Filter
1.
Click Packet Filter - you will get the following page:
64
Chapter 3: Basic Installation and Configuration
Advertisement
