Advertisement
BIPAC-74x Series Router – 741 GE, 741 GE V2.0 and 743 GE
RFC 1483 Routed Connections
Description: Your description of this connection.
VPI and VCI: Enter the information provided by your ISP. The default for Australian ISPs is
VPI=8, VCI=35.
NAT: The NAT (Network Address Translation) feature allows multiple users to access the
Internet through a single IP account, sharing the single IP address. If users on your LAN
have public IP addresses and can access the Internet directly, the NAT function can be
disabled.
Encapsulation method: Select the protocol format, the default is LlcBridged. Select the
one provided by your ISP.
DHCP client: Enable or disable the DHCP client, specify if the Router can get an IP
address from the Internet Service Provider (ISP) automatically or not. Please click Obtain
an IP address automatically via DHCP client to enable the DHCP client function or click
Specify an IP address to disable the DHCP client function, and specify the IP address
manually. The setting of this item is specified by your ISP.
Chapter 3: Basic Installation and Configuration
30
Advertisement
