Advertisement
BIPAC-74x Series Router – 741 GE, 741 GE V2.0 and 743 GE
Device Management
The Device Management advanced configuration settings allow you to control your router's
security options and device monitoring features.
Embedded Web Server:
HTTP Port: This is the port number the router's embedded web server (for web-based
configuration) will use. The default value is the standard HTTP port, 80. Users may specify
an alternative if, for example, they are running a web server on a PC within their LAN.
Management IP Address: You may specify an IP address allowed to logon and access
the router's web server. Setting the IP address to 0.0.0.0 will disable IP address
restrictions, allowing users to login from any IP address.
Expire to auto-logout: Specify a time frame for the system to auto-logout the user's
configuration session.
For Example: User A changes HTTP port number to 100, specifies their own IP address
of 192.168.1.55, and sets the logout time to be 100 seconds. The router will only allow
User A access from the IP address 192.168.1.55 to logon to the Web GUI by typing:
http://192.168.1.254:100
automatically logout User A.
Universal Plug and Play (UPnP):
UPnP offers peer-to-peer network connectivity for PCs and other network devices, along
with control and data transfer between devices. UPnP offers many advantages for users
running NAT routers through UPnP NAT Traversal, and on supported systems makes
tasks such as port forwarding much easier by letting the application control the required
settings, removing the need for the user to control advanced configuration of their device.
Chapter 3: Basic Installation and Configuration
in their web browser. After 100 seconds, the device will
95
Advertisement
