Advertisement
BIPAC-74x Series Router – 741 GE, 741 GE V2.0 and 743 GE
the LCP protocol.
MRU : Maximum Receive Unit. This is negotiated during the LCP protocol stage.
Use Ip Addr From IPCP: Specifies if the IP address given by IPCP negotiation process is
to be used.
Discover Primary/Secondary DNS: This setting enables/disables whether the
primary/secondary DNS server address is requested from a remote PPP peer using IPCP.
The default setting for this command is enabled.
Give DNSto Relay: Controls whether the PPP Internet Protocol Control Protocol (IPCP)
can request the DNS server IP address for a remote PPP peer. Once IPCP has
discovered the DNS server IP address, it automatically gives the address to the local DNS
relay so that a connection can be established.
Give DNSto Client: Controls whether the PPP Internet Protocol Control Protocol (IPCP)
can request a DNS server IP address for a remote PPP peer. Once IPCP has discovered
the DNS server IP address, it automatically gives the address to the local DNS client so
that a connection can be established.
Give DNSto DHCP Server: Similar to the above, but gives the DNS server address to the
DHCP server.
Primary/Secondary Remote DNS: Sets the primary and secondary local DNS server
addresses that will be given to a remote PPP peer when the peer requests a primary or
secondary DNS server IP address using IPCP. Setting the secondary IP address is
optional.
Discover Primary NBNS / Discover Secondary NBNS / Remote NBNS / Remote
Secondary NBNS: For technical staff inspection purposes.
Chapter 3: Basic Installation and Configuration
39
Advertisement
