Table of Contents
Advertisement
General operations
Connecting the telephone mute
function
You can connect your Traffic Assist Pro
with TMC to your car radio using the
optional cable for the telephone mute
function. Once this cable is connected
correctly, your Traffic Assist Pro mutes
the car radio for route guidance
instructions.
4004
!
Insert the jack on the cable into the
socket on the TMC receiver.
!
Connect the other end of the cable to
the telephone mute socket on your
radio
(see
the
manufacturer's
connection specifications).
26
Basic information about the
touch screen
The Traffic Assist Pro is fitted with a
touch screen.
4001
Note:
To ensure that the display's surface is
not damaged, you may only touch it
with your fingers or a blunt, non-smea-
ring object.
Operation
The buttons which appear in the menus
or message windows should simply be
touched so that they are displayed as if
they had been pressed.
If the key pressed is not permitted in the
current situation, a short signal will
sound.
Calibration
If the touch screen starts responding im-
precisely and e.g. buttons have to
be touched off-centre in order to be actu-
ated, calibration should be undertaken.
The calibration function is started from
the Settings menu (see also page 75).
Basic information about the
menus
During operations, you are assisted by
various menus and entry windows.
The main menu
The top menu level is the main menu.
The individual applications are started
from the main menu.
3001
You will find information about the indi-
vidual applications in the corresponding
main chapters.
Advertisement
Table of Contents
