Overview of the Feature Key
Relay - Relay Pulse
Pulse the specified external output relay (1 or 2) on for 5 seconds.
This function requires the relay switch (1 or 2) on the telephone system to be entered
when programmed.
Pressing
on for 5 seconds and then off.
[User | Digital Telephony | Advanced | Relay | Relay Pulse]
Rely+ - Relay On
Switch the specified external output relay (1 or 2) on.
This function requires the relay switch (1 or 2) on the telephone system to be entered
when programmed.
Pressing
on.
[User | Digital Telephony | Advanced | Relay | Relay On]
Rely- - Relay Off
Switch the specified external output relay (1 or 2) off.
This function requires the relay switch (1 or 2) on the telephone system to be entered
when programmed.
Pressing
off.
[User | Digital Telephony | Advanced | Relay | Relay Off]
Resum - Resume Call
Resume a call previously suspended into a specified ISDN exchange slot. This function
is not supported in the USA.
This function requires the exchange slot number to be specified when programmed.
Pressing
suspended into the specified exchange slot. Suspended calls can be resumed by any
extension.
[User | Digital Telephony | Advanced | Call | Resume Call]
See also:
•
•
Rtriv - Retrieve Call
Retrieve a call previously held into a specified ISDN central office slot and is only
supported if the central office provides a Q.931 hold facility. This function requires the
central office slot number to be specified when programmed. This function is not
supported in the USA.
Pressing
held into the specified central office slot. Held calls can only be retrieved by the
extension that put the call on central office hold.
[User | Digital Telephony | Advanced | Call | Retrieve Call]
See also:
•
IP Office (R3.0) 2402 User's Guide
40DHB0002UKEX – Issue 1 (5th February 2005)
Feature and then the relevant dial pad digit switches the specified relay
Feature and then the relevant dial pad digit switches the specified relay
Feature and then the relevant dial pad digit switches the specified relay
Feature and then the relevant dial pad digit resumes any call previous
SusCW - Suspend CW on page 29.
Suspe - Suspend Call on page 29.
Feature and then the relevant dial pad digit retrieves any call previous
Hold - Hold Call on page 21
Feature Key - Page 27
Feature Key - Page 27
Overview of the Feature Key