Filter Criteria - Cm Software Management View - Avaya Integrated Management Software Update

Filter Criteria - CM Software Management View

The following table displays the list of fields you can use to filter the information displayed in the
Targets Table. You can filter by any combination of these fields:
Table 8: Filter Criteria Fields
Field
Device Name
IP Address
Main IP Address
Device Type
Software Version
Available on Media
Server
Server Status
Server
Configuration
Analyzer State
Description
In the Enter matching pattern field, enter the name of the target you
want to display. The name can contain only one wildcard (*).
In the Enter matching pattern field, enter the IP address of the
target you want to display. The IP address can contain a wildcard (*),
or a range (0-255), or a number in the range (0-255).
For simplex servers - the Main IP Address represents the
●
address of the server.
For duplex servers - the Main IP Address represents the
●
shared IP address that represents both servers.
For ESSs and LSPs - the Main IP Address represents the IP
●
address of the CM that the ESS or LSP is backing up.
In the Enter matching pattern field, enter the main IP address of the
target you want to display. The IP address can contain a wildcard (*),
or a range (0-255), or a number in the range (0-255).
In the Device Type section, select the product categories and
sub-categories you want to display. For more information on filtering
by device type, refer to
In the Sw version section, select the software version used for the
target you want to display.
In the Available on Media Server section, select the release that
you want to display from the list of releases available for installation
on the Media Server hard drive or CD-ROM drive.
In the Server Status section, select the status of the server that you
want to display. Options are active, standby, busy out or dormant.
In the Server Config section, select the type or types of server that
you want to display. Options are main, LSP, ESS or ICC.
In the Analyzer State section, select the icon or icons representing
the version update status of targets you want to display.
Filtering the Targets Table
Filtering by Device Type
Issue 6 January 2008
on page 36.
35