Table of Contents
Advertisement
The Targets Table
4. Click OK. The filtering criteria are activated and the dialog box closes.
Or
Click Apply. The filtering criteria are activated and the dialog box remains open.
Note:
The Targets Table only displays targets that meet all the selected criteria.
Note:
To deactivate filtering:
1. Click Clear. All filtering criteria are cleared.
2. Click OK. Filtering is deactivated and the dialog box closes.
Note:
When filtering is active,
Note:
Filter Criteria - Gateways, Data Switches and Circuit Packs View
The following table displays the list of fields you can use to filter the information displayed in the
Targets Table from the Gateways, Data Switches, and Circuit Packs view. You can filter by any
combination of these fields:
Table 6: Filter Criteria Fields - Gateways, Data Switches and Circuit Packs View
Field
Device Name
IP Address
Main IP Address
Communication
Manager
Select PIM Group
30 Avaya Integrated Management Release 5.0 Software Update Manager
appears in the Status Line.
Description
In the Enter matching pattern field, enter the name of the target you want to
display. The name can contain only one wildcard (*).
In the Enter matching pattern field, enter the IP address of the target you
want to display. The IP address can contain a wildcard (*), or a range
(0-255), or a number in the range (0-255).
In the Enter matching pattern field, enter the main IP address of the target
you want to display. The IP address can contain a wildcard (*), or a range
(0-255), or a number in the range (0-255). (Only available in CM Software
Management view.)
In the Select Communication Manager field, select the communication
manager used for the targets you want to display. (Only available in
Gateways, Data Switches, and Circuit Packs view.)
In the Select PIM Group field, select the PIM group to filter. This enables
filtering devices by device groups defined in the Avaya Provisioning and
Installation Manager.
1 of 2
Advertisement
Table of Contents
