Table of Contents
Advertisement
Figure 22: Media Server Details Dialog Box - Manage Updates Tab
To unpack, activate, or remove a service update:
1. Select the service update that you want to use from the List of installed updates table.
2. Click the operation you want to perform from the options listed below the List of installed
updates table.
The operations that may be performed on a selected service update depend on the status
of the update. The following list describes the service update status and the operations that
may be performed on a service update with the status described:
- Packed - The service update file is located on the media server. You may choose to
unpack the patch or remove it from the /var/home/ftp/pub directory.
- Unpacked - The service update file was unpacked. You may choose to activate the
service update or remove the extracted files from the opt/updates directory.
- Activated - The service update was unpacked and activated. You may choose to
deactivate the service update. When you deactivate the service update, the status
reverts to Unpacked.
3. Click Apply.
4. Click Close. The dialog box closes.
To install a service update from a library:
1. Select the library from the drop-down list. A list of available updates is displayed.
2. Select the service update you want to install.
Configuring the Media Server Software Repository
Issue 6 January 2008
67
Advertisement
Table of Contents
