Other Commands; A.1.6 Other Commands - Freescale Semiconductor Target Interface MMDS0508 User Manual

Ap p en d ix
MMDS Commands
A.1.5.2 Syntax
RESET [GO|STOP]
GO: Resets the MCU and does a Go from Reset.
STOP: Resets the MCU and stops (default).
A.1.5.3 Description
The RESET command resets the target MCU.
Examples:
Reset Go
Resets the MCU and does a GO from Reset.
Reset
Resets the MCU and stops (default setting).

A.1.6 Other Commands

LOADMAP
A.1.6.1 Short Description
loads memory map.
A.1.6.2 Syntax
LOADMAP fileName | MCUID
fileName: a standard full path of a file that defines a memory map.
MCUID: the MCU identifier. If the command includes an MCUID value, the system
loads a memory map from the file that matches this value.
A–78 MMDS0508 Target Interface
Freescale Semiconductor, Inc.
For More Information: www.freescale.com