Visonic PowerMaxExpress Installer's Manual page 7

PERFORM STEP 1, 2 & 3 ON A DESKTOP, BEFORE THE MOUNTING!
1
Extract either plastic
segments (will be used later)
4
Remove power supply terminals
cover
Fasten power cable by clamp (extracted in step 2).
Note: The clamp direction depends on the cable thickness.
Note: Do not use mains cable other than that supplied by the manufacturer (3 m long).
D-303973 PowerMaxExpress Installer's Guide
POWER CABLE ROUTING
2
Extract plastic segment
(will be used later)
5
Insert power cable and connect it to
the Power Supply Unit terminals.
Verify that the wires are properly
fastened!
7
Power cable clamp options
for thin for thick cable
cable (reversed clamp)
Extract plastic segment
(left or right, according to
the power wiring direction)
Insert pastic cap to the power
cable entry (extracted in step 1)
Power
supply
module
Close power
supply terminals
cover
3
6
8
Terminals
cover
7