Visonic PowerMaxExpress Installer's Manual page 44

Multi-button PowerCode transmitters transmit the same
code each time the same button is pressed. They can be
used for emergency signaling. They can not be used for
arming / disarming.
CodeSecure transmitters are of the rolling code type - they
transmit a new code each time the same button is
pressed. This provides a higher security level, especially in
arming / disarming applications, because the code can not
be copied ("grabbed") by unauthorized people.
Following are the basic details of several compatible
transmitters. The possible applications for each push-
button are indicated in each drawing.
A. MCT-234
'Keyfob' transmitter. You
can program the AUX
(auxiliary) button to perform
various tasks, in
accordance with the user's
needs.
Pressing AWAY and
HOME together for 2 sec.
initiates PANIC alarm.
Pressing AWAY for 2 sec.
initiates Latchkey arming.
B. MCT-237
Two-way CodeSecure 6-
button 'Keyfob' transmitter.
You can program the AUX
(auxiliary) buttons to
perform various tasks, in
accordance with the user's
needs.
Pressing AWAY and
HOME together for 2 sec.
initiates PANIC alarm.
Pressing AWAY twice
within 2 sec. initiates
Latchkey arming.
C. MCT-231 / 201*
(N.A. in North America)
Single-button pendant
units. The MCT-231 (Code-
Secure) and the MCT-201
(PowerCode) can be
enrolled to perform
functions as shown. Both
units look alike.
D. MCT-134 / 104*
(N.A. in North America)
4-button hand-held units.
MCT-134 (CodeSecure)
can replace the MCT-234
keyfob. MCT-104
(PowerCode) can perform
emergency and non- alarm
functions. Both units look
alike.
E. MCT-132 / 102*
(N.A. in North America) 2-
button units. MCT-132
(CodeSecure) can perform
functions as shown. MCT-
102 (PowerCode) can
perform emergency and
non-alarm tasks. Both units
look alike.
44
DISARM
AWAY
HOME
AUX
MCT-234
DISPLAY
DISARM
STATUS /
PARTITION
AWAY
AUX 2
HOME
AUX 1
MCT-237
MCT-231 / 201
MCT-134 / 104
MCT-132 / 102
F. MCT-131 / 101*
(N.A. in North America)
Single-button units. The
MCT-131 (CodeSecure)
and the MCT-101
(PowerCode) can be
enrolled to perform
functions as shown. Both
units look alike.
G. MCT-211*
Water-proof, wrist-worn
Power-Code transmitter.
Can be enrolled to perform
emergency or non-alarm
functions.
H. MKP-150/151/152
The MKP-150/151/152
operates using two-way
encrypted coded
transmission and provides
aural and visual indications.
For each control panel, a
maximum of two MKP-
150/151/152 keypad
devices may be enrolled.
The device enables the user
to arm/disarm the alarm
system, to initiate
emergency / fire / panic
alarms and to turn lighting
devices on and off.
I. MKP-160
A 2-way wireless
PowerCode touch screen
keyprox. Enables most
common everyday user
functions and is compatible
for use with partitions.
J. Contact transmitter
MCT-320. MCT-320 is a fully
supervised, PowerCode
magnetic contact transmitter, for
use with PowerCode products.
The transmitter includes a built-
in reed switch (that opens upon
removal of a magnet placed
near it). The MCT-320 tamper
switch is activated when the
cover is removed or when the
detector is removed from the
wall. A periodic supervision
message is transmitted
automatically. The target
receiver is thus informed, at
regular intervals, of the unit's
active participation in the
system.
* Not UL listed.
D-303973 PowerMaxExpress Installer's Guide
MCT-131 / 101
MCT-211
AWAY
MKP-150/151/152
MKP-160
MCT-320