Reporting By Sms; Conducting A Walk Test - Visonic PowerMax Complete User Manual

Command
1 Arm AWAY
2 Arm AWAY instant
3 Arm AWAY Latchkey
4 Arm AWAY Latchkey instant
5 Arm HOME
6 Arm HOME instant
7 Disarm
8 Turn PGM on
9 Turn PGM off
10 Define custom house identity
(see note)
11 Query system status
Note: House ID includes up to 16 characters, for example JOHN'S HOUSE.

Reporting by SMS

This option is applicable only if the GSM Module is
installed. The PowerMaxComplete system can send
SMS messages to a registered SMS telephones (up
to 4). (The SMS telephone registration is preselected
by the system installer).
The reported SMS messages are quite clear and self-
explanatory and therefore are not detailed in this guide.
Example of the reported SMS messages:
•
JOHN'S HOME
**AWAY**
•
JOHN'S HOME
**DISARM**
•
JOHN'S HOUSE
POWERMAX: LOW BATTERY
GARAGE: LOW BATTERY
•
JOHN'S HOUSE
STATUS MESSAGE 01
(Event list is displayed)
D-302213
SMS Format
"AWAY <code>"
or
"AW <code>"
"AWAY INST <code>"
or
"AWI <code>"
"LATCHKEY <code>"
or
"LK <code>"
"LATCHKEY INST <code>"
or
"LKI <code>"
"HOME <code>"
or
"HM <code>"
"HOME INST <code>"
or
"HMI <code>"
"DISARM <code>"
or
"DA <code>"
"PGM ON <code>"
"PGM OFF <code>"
"HOUSE NAME <code> <house ID>"
or
"HN <code> <house ID>"
"STATUS <code>"
or
"ST <code>"
Note
Status messages can be sent only to a calling
telephone whose identity number is not blocked by
the user!
Note: The PowerMaxComplete may react with a
delay to received SMS messages if a GPRS session
is in progress at the same time.

Conducting a Walk Test

The walk test is an indispensable operation by which
you verify that all detectors function properly, without
disturbing the neighbors with loud sirens. The test
must be performed at least once a week, and
should include all detectors in all zones.
Before performing walk test, all the detectors must
be in normal state. Normal state is achieved when no
motion is made for at least 2 minutes.
SPECIAL FUNCTIONS
SMS format –
PowerMaxComplete Partition
System
"P# AWAY <code>"
or
"P# AW <code>"
"P# AWAY INST <code>"
or
"P# AWI <code>"
"P# LATCHKEY <code>"
or
"P# LK <code>"
"P# LATCHKEY INST <code>"
or
"P# LKI <code>"
"P# HOME <code>"
or
"P# HM <code>"
"P# HOME INST <code>"
or
"P# HMI <code>"
"P# DISARM <code>"
or
"P# DA <code>"
"P# PGM ON <code>"
"P# PGM OFF <code>"
"P# HOUSE NAME <code> <house ID>"
or
"P# HN <code> <house ID>"
"P# STATUS <code>"
Or
"P# ST <code>"
21