Mouse As Slider; Using The Mouse For In/Decrementing; Numerical Input - Emagic Logic fun User Manual

The Mouse
the desired item and releasing the button. If you want to choose
an item which is outside the visible section:
•
move the mouse over the top or bottom edge of the menu;
the further you move it, the faster you will scroll through the
menu.
•
on MacOS: hold down the
then let go of the mouse button and use the scroll bar on the
right of the pull-down menu to scroll through it. When the
highlight reaches the entry you want, release the
•
on Windows: click using the right mouse button. You can
then let go of both mouse buttons.

Mouse as Slider

You can set practically all the numerical parameters, (even note
values or names) by grabbing the parameter value and moving
the mouse up or down. If the parameter is made up of several
separate numbers (e.g. song position), you can adjust each indi-
vidually.

Using the Mouse for In/Decrementing

All the parameter values which can be set using the mouse as a
slider (and even some of the flip menu parameters) may also be
increased or decreased in single units by
•
on MacOS: clicking on the top or bottom half of the value
while holding down the
•
on Windows: clicking with the left or right mouse buttons
while holding down the

Numerical Input

Double-clicking on a numerical parameter value opens an
input field. The previous value will be highlighted, to allow it
to be overwritten by a new entry. You can also use the mouse to
make a partial selection in an input field so that only the high-
User Guide
Version 4.1
S
key as you do this. You can
ç
key.
A
key.
r
S
key
71