The Partbox-Inserting Notes; Ties - Emagic Logic fun User Manual

The Partbox—Inserting Notes
You can, however, move all notes to any desired position by
editing their numeric bar position in the Event List. For exam-
ple, if you want to insert a half note on "two" in 4/4 time, place
it on "one" or "three", and change the position to "two" in the
Event List.
13.5 The Partbox—Inserting
Notes
The note values are organized in three sub-groups: Simple
(binary) rhythmic values, dotted values and triplet values:
Inserting any of those symbols creates a MIDI note event with exactly the length of
that value. For display however all these MIDI notes are interpreted by Logic fun as
if they had been recorded in real time. Therefore the Display Parameter Box' settings
have to be set in a way that allows the inserted notes to be displayed correctly. Please
read the page 193
If you simply want to enter notes with the mouse, without
using real time recording at all, select the highest possible Qua
value in the Display Parameter Box.

Ties

Ties cannot be inserted in Logic fun, but are created and
displayed automatically, according to the length of the MIDI
note. The reason: Notes which are displayed as several graphi-
cal notes connected with ties in Logic fun always represent
only one MIDI note. To insert such notes you first insert a
shorter note value, and change its length afterwards in the
Event Parameter Box or the Event List.
User Guide
Version 4.1
r
185