Copying Sequences; Moving/Copying Onto Another Track; Changing The Length Of A Sequence - Emagic Logic fun User Manual

Chapter 7
Arrange Window

Copying Sequences

To copy a sequence, move it (see above) while holding down
ç
the (Windows) or the
a copy at the new location, while leaving the original at its start-
ing position.
Instead of this, you can also copy sequences to the clipboard
using
Edit > Copy
with
Edit > Paste
Make sure you set the song position line to the target position
first, and then highlight the target track. The sequences will be
inserted into the track, starting at the song position.

Moving/Copying onto another Track

Sequences cannot just be moved in time, but also to other
tracks. Grab the sequence, and move it onto the track you want.
To do this, use the help line that appears in the local menu bar
while moving, to make sure that the position in time does not
change. Of course, you can use the described cut, copy and
paste functions to move or copy sequences to another track.

Changing the Length of a Sequence

You can adjust the start and end points of a sequence, thereby
also changing its length. To do this, grab the lower right-hand or
left-hand corner with the mouse, and move the mouse in the
direction you want.
Be aware that the start point of a sequence can't be later than
the first MIDI event of the sequence. If you do not need certain
events at the beginning of the sequence anymore, then remove
this piece with the scissors.
The end point can be moved as far as you want to the left, as
long as it is not before the song start and the first MIDI event.
Emagic
114 Logic fun
O
(Macintosh) key. This will create
, and then move them into another position
.