Display - Emagic Logic fun User Manual

Chapter 11
The Event List
display, and access or add them (by clicking on them with the
right mouse button (Windows), or while holding down the
key (Mac)). The structure of the actual list display
described on page
arrow-shaped position marker
event.

Display

The event type buttons allow you to "filter" the display to
remove individual event types from the Event List, so that you
can view only the specific types of events you are interested in.
Click the desired button with any tool (except the pencil).
If a button is grayed out, that event type will not be displayed.
All the functions affect only the events displayed, so non-
displayed events are protected from any alterations you make.
Here is a short overview. For more detailed information on the
individual event types see
The note symbol stands for note events.
The symbol with the two digit, seven-segment display stands
for program change events.
The control wheel symbol with a marker in the center (pitch
bend wheel) stands for pitch bend events.
The control wheel symbol with a marker at the bottom (modu-
lation wheel) stands for all control change events.
The single weight symbol stands for aftertouch events (channel
pressure).
The multiple weights symbol stands for polyphonic key pressure
events (polyphonic aftertouch).
Emagic
160 Logic fun
164. If the Catch function is switched on, the
4
will always point to the current
page 166.
C
3
is
Important!