Emagic Logic fun User Manual page 116

Chapter 7
Arrange Window
Moving a Track
A track can be moved to any other position in the track column.
Just grab the track number, and drag it to the position you want.
Logic fun will automatically reorganize the tracks, and move
the following tracks accordingly.
Two neighboring tracks can be switched in this way.
Deleting a Track
To delete a track, select the track in the track column and
choose
Track > Delete Track
window. If there are sequences on this track, Logic fun will ask
you via dialogue box if these should be deleted, as well.
Selecting all Sequences in a Track
If the cycle mode is not active, then click on the track you want
in the track column. All sequences of this track will be selected,
and are available for further operations.
Selecting Sequences within the Cycle Locator
Use the cycle function if you want to select sequences which
are only within a certain span of time. To do this, mark the
appropriate cycle area in the bar ruler, and click on the track you
want in the track column. Now, only those sequences within
the cycle area on the track are selected.
Deleting the Contentsof a Track
If you choose a track and press
tosh), all the sequences on this track will be deleted. The track
itself, however, will remain.
You can also delete sequences within a certain section of time
by marking it off with the cycle locators (see above).
Emagic
112 Logic fun
in the local menu of the Arrange
∂
(Windows) or
D
(Macin-
Tip