14.5 Functions; Normalize - Emagic Logic fun User Manual

Functions
The Undo command in the Sample editor is independent of
Undo in other windows. This allows you to test edits made in
the Sample editor in context with the entire arrangement.
When you close the Sample editor, after making a destructive
edit, a dialog box will ask you whether you want to keep the
edit, or undo it.

14.5 Functions

Following are the Sample editor functions, which can be used
to polish your audio recordings.
Each command operates on the currently selected portion of
the file. The
Edit > Select All
want to process the entire audio file.
All the following operations are destructive, which means that
they will change the file on the hard drive. The
can only be used to reverse the very last destructive edit. .

Normalize

The
Functions > Normalize
signal to the highest possible level without clipping.
The selected area of the file is analyzed, and the highest peak is
located. The entire selection is then raised by an equal amount,
so that the peak is just at 0db. This increases the overall level of
the selection, without changing its dynamic range.
User Guide
Version 4.1
function should be used if you
function brings a digital audio
r
command
Undo
Tip
Warning
X
213