Delay; Region Anchor - Emagic Logic fun User Manual

Regions

Delay

Regions can be advanced or delayed with the Delay parameter.
The delay is calibrated in increments of clock ticks.

Region Anchor

The anchor is a positioning reference point in the region. When
a region is moved, the display will show the anchor point in the
information line, instead of the start point, as with MIDI
sequences.
To guarantee perfect synchronisation with the sequencer, the
anchor may need to be positioned within the region, and this
position should be a peak, in most cases. Especially with drun
recordings, this will allow you to move sections in the Arrange
window so that the peaks fall on rhythmically logical points.
Some functions and parameters that are used for MIDI events,
can not be used for audio recordings.
Adjusting the anchor and destructive processing of audiofiles
can only be done in the Sample Edit window.
Many important functions are the same for both audio and
MIDI, such as automatic naming of sequences, ability to
change position and length, mute, solo playback, delay, loop
etc.
User Guide
Version 4.1
r
141