Playing The Entire Audio File; Playing The Current Selection; Playing After A Specified Point; Cycle Playback - Emagic Logic fun User Manual

Using the Sample Editor
is released. Double clicking on a point in the Overview display
will start playback from that point.

Playing the Entire Audio File

The keycommand Play/Stop All will play the entire audio file,
regardless of the current selection.

Playing the Current Selection

To play the current section, click on the button with the small
loudspeaker icon.
This can also be done using the key command Play/Stop Selec-
tion.
Playing After a Specified Point
By double clicking on the time line, the audio file will play from
the click point to the end of the selection. Double clicking
beyond the current selection will play the audio file to the end.

Cycle Playback

The Cycle button is located on the left side of the Sample Edit
window, above the loudspeaker button. Activating this will
cause the selected section to be repeated continuously in play
mode.

Selection Commands

Selecting All Audio Files

Selecting
Edit > Select All
the PC), selects the entire audio file.
User Guide
Version 4.1
Ca
( with the Mac, and
r
ça
with
209
X
X