Testing The Midi Connection; Test The Midi-Out - Emagic Logic fun User Manual

Chapter 3
Getting Started

Testing the MIDI Connection

You should now make sure that the connection between Logic
fun and your MIDI system is working properly.
1. Launch Logic fun.
First, test to see if your MIDI keyboard transmits.
2. Open the Transport Window by selecting
the window menu, or press
You can see the MIDI indicator in the upper right-hand corner
of the Transport Window.
If there is no activity, the display will show "No In/ No Out".
3. Now play a couple of notes on your MIDI keyboard.
In place of "No In", the received events should now be
displayed.
If this is not the case, test the following:
4. Is the MIDI-Out connection of the keyboard connected
correctly with the MIDI-In of your computer?
•
Is the cable working properly?
•
Did you choose the correct port in Global Preferences?

Test the MIDI-Out

Now test to see if Logic fun is sending MIDI events to your
tone generators.
1. Choose
File> Open
selection box.
It is loaded and displayed on the screen.
2. Click on the PLAY button in the Transport Window, or
press 0 on the computer's numeric keypad.
The tutorial will run, and the second line of the MIDI indicator
should show the sent events.
Emagic
40 Logic fun
C7
, and select the tutorial song in the file-
in
Open Transport