Muted Sequences Or Tracks In The Score Display; Adapting Midi Sequences For Score Printout - Emagic Logic fun User Manual

Adapting MIDI Sequences for Score Printout

Muted Sequences or Tracks in the Score Display

Muted sequences will not be displayed in the Score window, no
matter what the Display Level or Instrument Filter settings are.
Sequences on muted Tracks, however, will remain visible,
although they will not be played back via MIDI.
13.11 Adapting MIDI Sequences
for Score Printout
If a song's MIDI sequences have been recorded in real time,
the Arrange window often looks similar to the picture below.
Sequences are spread all over the place with gaps in between.
Sometimes sequences belonging to the same instrument are on
different tracks. Sometimes Loops are also used:
The score printout always corresponds to what is displayed in
the active Score window. The staves which represent the
sequences shown above would therefore be spread over the
pages, with lots of space in between.
However, if you want to print out the arrangement shown
above, you will need continuous staves for each instrument
(track). This is achieved by changing the length of the
User Guide
Version 4.1
r
199