Emagic Logic fun User Manual page 107

Bar Ruler
is automaticallyextended, however, as soon as an object goes
past this position. You can manually set the end of song to any
position you like. Bring the end marker into view, by either
moving the horizontal scroll bar to the right, or making the hori-
zontal zoom factor smaller, until the marker is visible. Grab the
marker, and drag it to the desired position.
If possible, set the song end marker to the actual end of the
song. That way the horizontal scroll bar will be scaled accord-
ingly, and its range limited to the length of the song.
Song-Position Line
The song position line is a vertical line inside the window
(Arrange window, Matrix and Score editors), which displays the
current position of the song. You can move to any position in the
song with the song position line.
The song position line in Logic fun is somewhat similar to the
recording head of a tape machine.
Jump to a Certain Position
Click on the position you want in the lower third of the bar
ruler, to move the song position line to that point.
Shuttling
Holding down the mouse button in the lower third portion of
the measure ruler allows you to move the song position line
back and forth in the song. If, in doing so, you move the song
position line past the visible section of the window, the view
will shift.
Start and Stop
By double-clicking in the lower third of the bar ruler, you can
start or stop the playback from that position.
You can also choose between a thin or wide song position line.
User Guide
Version 4.1
r
Song-Position Line
Tip
103