Display Current Song Position; Zoom A Window Excerpt; Cycle Mode - Emagic Logic fun User Manual

Chapter 4
MIDI Tutorial
•
Engage Play. Now click on the bar ruler, and hold the left
mouse button. You can move to any position, and listen by
moving the song position line.
If you know to which location you would like to go, you can
enter this position directly with the "locators". To the right and
next to the transport buttons, Logic fun shows the current song
position, in both absolute time and as musical measures.
•
Click on the song position indicator, and hold the mouse
button. Place the song position at "17 1 1 1" and start play-
back. Logic fun now plays starting at measure 17.

Display Current Song Position

If you manually enter song positions, the window view that you
see will not necessarily correspond to what you hear. You can,
however, guarantee that these two things will always match.
•
Click on the catch button on the upper left in the transport
field, and the window excerpt follows the song position line
again.
The window viewwill update, as soon as the song position line
leaves the visible field, only if the catch function has been
enabled:

Zoom a Window Excerpt

You can view the entire song in the window by using the two
telescope buttons on the upper right edge of the window:
Click on the left half of the horizontal zoom button until you
can see all of the sequences in the window.

Cycle Mode

In cycle mode, you can cause a section of the song to repeat for
as long as Play is engaged, in order to edit a sequence, for
instance, or record new tracks in a specific section of the song.
Two "locators" can be used for this. These are position markers
Emagic
52 Logic fun