Table of Contents
Advertisement
QUICK SETUP GUIDE
In the example on the previous page we have labeled the
two front panel inputs: "Mic/Inst ch 1" and "Mic/Inst ch 2".
We have also activated those inputs by pressing the
"power-button".
•
Exit the VST Inputs menu.
•
Create an audio track via:
"Project - Add track - audio"
Now you need to select the input and output for that
track.
•
Click on the "in field" as illustrated above. Now select
one of the inputs that we earlier setup in the VST
Inputs menu. E.g. "Mic/Inst ch 1".
•
Unless you have changed the default settings for the
output busses the "out" is set to "BUS 1". Leave it.
You can now record via the Konnekt front panel inputs
and playback via the Main outs.
8
Fabrik R as VST send effect
The following example illustrates how Fabrik R is set up
as a send effect using Cubase LE. This procedure varies
slightly compared to higher versions of Cubase.
•
Go to: Devices/VST Send effects.
•
Select Fabrik R from the Konnekt folder.
•
Now go to send effects, select and activate Fabrik R
if it isn't already and use the slider to send to Fabrik R.
Go to the Fabrik R plug-in by pressing the "e".
Select Plug-In routing mode for Fabrik R via the drop-
down menu in the bottom of the Plug-In display. *)
Hide quick links:
Advertisement
Table of Contents
